Formula Student Bizkaia is constituted by a group of students from the Faculty of Engineering of Bilbao, belonging to the University of the Basque Country (UPV/EHU).
Faculty advisors
Javier Corral
Mikel Díez
Charles Pinto
Asier Zubizarreta
The Faculty Advisor is expected to accompany the team to the competition and will be considered by competition officials to be the official university representative. They also may advise their team on general engineering and engineering project management theory.
Team Leader
Nerea Marrodán
Team Leader
The team leader is the person who provides direction, instructions and guidance to the team, for the purpose of achieving a certain goal. She also works with the technical managers and the team sponsors to obtain the required resources to support team's activities.
Team Managers
The team needs a number of different managers with various skill sets. Technical managers lead technological development activities. They tend to possess a high degree of expertise in a given technical area, so that they must be able to lead a team developing that code.
Iker Raigoso
Technical Leader FSB2021
Mikel San Segundo
Technical Manager FSB2020
Álvaro Feijóo
Technical Manager FSB2020
Iván Cadarso
Technical Manager FSB2020
Pedro Zamacona
Financial Manager
Aerodynamics group
Aerodynamics group is responsible for the design, calculus and manufacture of all aerodynamic parts of the vehicle. They develop the front and rear wing, including different pieces as the diffuser, undertray the difuser and the sidepods. In adition, they are responsible for the cooling system of the powertrain. One of the main objectives of the group is to improve the performance of the car achieving an optimun lift/drag ratio. They are continously innovating with the designs, manufacturing techniques and new materials implementation.
María Celaya
Aerodynamics Manager
Aitor Antón
Asier del Pozo
Iker Castellano
Gonzalo Fernández de Castro
Chassis group
Chassis group is responsible for the design, calculus and manufacture of structural parts of the vehicle. They develop the elements as the monocoque. Moreover they also develop different pieces as the seat, anti-roll arches, headrest or nose. One of the main objectives of every year is reducing weight keeping the pilot safe and conformtable and innovating with the designs and materials used.
Imanol Díaz
Chassis Manager
Kerman Gorroño
Laura Ruíz
Andoni Egurrola
Xabier Rojo
Álvaro González
Asier Vergara
Dynamics group is in charge of vehicle dynamics and the design, manufacture and maintain mechanical assemblies that make up the unsprung mass of the vehicle: corners and suspension. It also handles the steering assembly and braking system that includes parts of corners and the floorboard.
Ander Gómez
Dynamics Manager
Jon Hueso
Begoña Ubiria
Kevin Cadavid
Alex Ayarza
Alex Ayarza
Josu Presilla
Leyre Barcina
Daniel Pangua
Dynamics group
Dynamics group is in charge of vehicle dynamics and the design, manufacture and maintain mechanical assemblies that make up the unsprung mass of the vehicle: corners and suspension. It also handles the steering assembly and braking system that includes parts of corners and the floorboard.
Ander Gómez
Dynamics Manager
Jon Hueso
Begoña Ubiria
Kevin Cadavid
Alex Ayarza
Josu Presilla
Ander Igual
Leyre Barcina
Leire Olaeta
Daniel Pangua
Electronics group
Electronics group is in charge of low voltage systems of the vehicle. They are responsible for the design and creation of PCBs, the software implemented in them and telemetry. Its function is to gather information from the sensors distributed throughout the car and manage them in the electrical control unit (ECU), with the aim of sending signals to the different parts of the car, from the floorboard through the dashboard to the rear module where the motors and inverters are located.
Borja Díez
Electronics Manager
Mario Rodríguez
Markel Botas
Jon Serna
Xabier Echániz
Egoitz Andrés
Alejandro Moreno
Organization group
Organization group despite not being related to the design and technical production of the vehicle has an important role in the team. It is responsible for managing communication and the proper operation of the team in terms of workload distribution and organization of time.
Pedro Zamacona
Financial manager
Jone Miren Remón
Marketing manager
Ainhoa Ye
Powertrain group
Powertrain group is responsible for the high voltage traction system: from the accumulator (batteries system) to the motors including inverters. Its aim is to develop a strong, reliable and powerful tractive system and for this reason is in charge of the design, validation, construction and development of the assembly.
Furthermore, its aim is also to transmit the power generated in the motors to the wheels of the car. This group is in charge of mainshafts, epicyclics, bearings and all supports and anchoring systems of these components to the monocoque
Aritz Larruskain
Powertrain manager
Asier Lejarza
Asier Bilbao
Asier Ibarrondo
Ricardo Maté
Miguel Vázquez
Martin López
Simulation group
The simulation group is responsible for simulating the behavior of the car through a mathematical model developed by the students.
Eric Parra
Simulation manager
Aimar Bilbao
Mónica García
Adriano Navarro
